menu_icon

arrow_down
  • English
  • Français
  • Deutsch
  • Español
  • Italiano
  • Português

FEATURE SUMMARY

LINE ARTS SHOWN IN THIS MANUAL ARE FOR REFERENCE ONLY AND MAY VARY FROM ACTUAL PRODUCT.
CARBON COMPOSITE HELMET SHELL AND PRE-PREG HELMET SHELL ARE ALSO AVAILABLE.
1. Flip-back Chin Bar
Scorpion developed a unique and easy-to-operate ratchet system with automatic opening face shield. Scorpion’s flip-back ratchet system offers not only slim thickness but also proper seal to realize a perfect full-face looking design and functionality.
2. Speedview® Retractable Sun Visor
Retractable internal sun visor changes positions with a simple slide of a switch.
3. KwikWick® III Liner Fabric
The removable and washable liner features a soft and supple hypo-allergenic, anti-bacterial material with advanced moisture wicking properties.
4. Large Eyeport
EXO-Tech has a large eyeport that offers wider vision for safer riding, and accommodates most brands of goggles and sizes.
5. Pinlock® Ready FaceShield
The shield is with Anti-Scratch hardened coating, and is ready for Pinlock® MaxVision® system, the world’s best fog free resistant system.
6. 3D Contoured Cheekpads
Plush removable and washable 3D contoured cheekpads for ultimate fit and comfort lined with our KwikWick® III Fabric.
7. Aero-tuned Ventilation System
Intake ports across the front of the helmet force cool air into the helmet interior through air channels provided in EPS.
8. Speaker Pockets
Speaker ducts designed into the EPS allow compatibility with speakers up to 40mm (50mm for EXO-Tech Carbon).
9. KwikFit®
Kwikfit® cheekpads allow easy on and off of the most common styles of eye glasses.
10. One-touch Top Vent
Torsion spring applied to the top vent mechanism enables one-touch open and close.
11. Chin Bar Locking Lever (ECE-P/J)
Provides better stability by locking the chin bar
12. EXO-Com™ Universal Bracket Compatibility
Ready to accept EXO-Com™ Universal Bracket. EXO-Com™ shows perfect design match with EXO-Tech EVO, EXO-Tech EVO Carbon when used with the Universal Bracket Set that can be purchased optionally.

FRONT VIEW OF THE HELMET

Top intake vent Faceshield Faceshield lift tab Mouth intake vent Single button flip-back chin bar release
warning icon WARNING
Always check to make sure the crown liner, neckroll and cheek pad are installed before using the helmet. A helmet without the crown liner and/or cheekpad may increase your risk of serious injury or death.
Crown liner Chinstrap Cheek pads
Single button flip-back chin bar release Speedview® sun visor Chin bar locking lever Sun visor retraction lever

SPEEDVIEW® INTERNAL SUN VISOR

USING THE SUN VISOR
NOTE: THE RETRACTABLE INTERNAL SUNVISOR CAN BE LOWERED AND RETRACTED, REGARDLESS OF WHETHER OR NOT THE FACESHIELD IS UP OR DOWN.
Sun visor use
To lower the sunvisor, simply slide the SpeedView® sunvisor retraction lever towards the back of the helmet. To raise the sunvisor, just slide the SpeedView® sunvisor retraction lever towards the front of the helmet.
warning icon WARNING
DO NOT attempt to adjust while riding.
REMOVING / INSTALLING THE SUN VISOR
NOTE: FIRST, OPEN OUTER SHIELD TO THE HIGHEST POSITION. THEN LOWER THE SUNVISOR TO LOWEST POSSIBLE POSITION.
remove and install Sunvisor
Firmly hold the sunvisor with your hand and gently pull one side out away from the helmet to release.
Repeat to release the opposite side.
Reverse process for installation.

KWIKWICK® III LINER REMOVAL

AERO SKIRT
AERO SKIRT NOT REMOVABLE
The pliable Aero Skirt was designed to reduce wind from entering behind the face shield area, specifically to keep your face warmer in cold weather.
However, the aero skirt of EXO-TECH EVO series is not removable. It is strongly attached to mouth cover by engineering design because it can take off when you flip-back the chin bar.
CHEEK PADS REMOVAL (EXO-TECH EVO)
Occassionally the interior may require removal for washing or replacement.
1. Slide your thumb behind the cheek pad.
2. Gently tug the cheek pad away from the helmet interior wall. There are three plastic snaps that require unsnapping. At the same time slide the plastic trim out of the helmet channel.
Repeat this process for both cheek pads.
Reverse this process for installation.
CROWN LINER REMOVAL (EXO-TECH EVO)
1. Remove the cheek pads.
2. At the back of the helmet pull the crown liner away from the shell unsnapping the two snaps.
3. Pull the crown liner out of the helmet while gently detaching it from the forehead channel.
Reverse this process for installation.
Note: The aero skirt is not removable. Flip the chin bar back before removing the cheek pads or the crown liner.
CHIN CURTAIN (•EXO-TECH EVO PRO/ EXO-TECH EVO CARBON ONLY)
EXO-TECH EVO PRO
- slide frame of the chin curtain into the gap between chin bar bottom.
- please check if the chin curtain stays strong.
Reverse this process for uninstallation.
NECK ROLL & CHEEK PADS REMOVAL (EXO-TECH EVO CARBON/ EXO-TECH EVO PRO)
Occassionally the neck roll and cheek pads may require removal for washing or replacement.
1. Slide your thumb between the neck roll and cheek pad at the area closest to the chin bar area and gently tug the neck roll/cheek pad away from the helmet interior wall. (There are three plastic clips that will need to be unsnapped away from the chin bar area.)
2. Repeat this process for both sides.
Reverse this process for installation.
Once the neck roll/cheek pads are removed you can remove the crown liner component.
CROWN LINER REMOVAL (EXO-TECH EVO CARBON/ EXO-TECH EVO PRO)
Occassionally the crown liner may require removal for washing, replacement or to change sizes.
1. Remove the cheek pads.
2. At the back of the helmet pull the crown liner away from the shell unsnapping the two snaps.
3. Pull the crown liner out of the helmet while gently detaching it from the forehead channel.
Reverse this process for installation.

OPENING THE FLIP-BACK CHIN BAR

While holding the upper part of chin bar (A) with one finger, push the lever up (B) and away the chin bar from face.
Rotate the chin bar until it is fully tucked in the back of the helmet. Be sure to hear the “click” sound.
The shield will be automatically opened while rotating the chin bar. You can lower the shield while the chin bar is tucked in the back.
warning icon WARNING
Small neodymium magnets are used to the ratchet mechanism for easier operation.
The magnet force is not very strong, and generally each magnet size is not considered as dangerous.
However, consult your physician before using if you are a pacemaker wearer and not sure about the effect caused by these magnets.

CLOSING THE FLIP-BACK CHIN BAR

Lift up the chin bar using the rest of fingers (A) while pushing the back of the helmet (B) with your thumb. Then the chin bar will be able to rotate.
Rotate the chin bar until the chin bar is closed. If the shield is lowered, it will be automatically opened while rotating the chin bar.
The shield is not automatically closed. You need to close it manually
warning icon WARNING
Be sure to hear the “click” sound to check the two hooks (positioned in red circled area of each side) are properly latched, and the chin bar is securely closed. This is very important for your safety.

FACESHIELD REPLACEMENT

LOCKING THE FLIP-BACK CHIN BAR
Fully open the chinbar, move the locking lever toward chinbar. Then the chin bar would lock.
Reverse the lever if you want unlock the chin bar.
NOTE: FOR SAFETY REASON, THE RATCHET SHOULD NOT BE DISASSEMBLED BY USER. IT IS RECOMMENDED TO CONTACT YOUR SCORPION DEALER OR WARRANTY CENTER IF IT IS NECESSARY TO DISASSEMBLE THE RATCHET TO REPAIR YOUR HELMET.
warning icon WARNING
DO NOT attempt to adjust while riding

Warranty Info

WARRANTY
All ScorpionExo® helmets have a warranty of 5 years.
Although there is no visible damage on your helmet, general wear and tear over time may affect overall function of protective helmet and increase the risk of injury in accident. It is advisable to replace your helmet no later than every 5 years from purchase.
Should you have a warranty claim, go to your Scorpion dealer with your invoice (this is you purchase proof, it's necessary in order to start the warranty process).
You can find our dealers' list on ScoprionExo websites listed below (choose your country and then the location).
The dealer will contact our after sales service and start the warranty process in order to check and/or repair your helmet.
LIMITATION OF WARRANTY
NO WARRANTIES ARE OFFERED BEYOND THE LIMITED WARRANTY EXPRESSLY SET FORTH IN THIS MANUAL. TO THE FULLEST EXTENT PERMISSIBLEUNDER APPLICABLE LAW, WE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, OMISSIONS, COMPLETENESS, CURRENTNESS AND DELAYS. IF THESE LIMITATIONS, CONDITIONS, AND OTHER POLICIES INCORPORATED BY REFERENCE ARE HELD TO BE UNENFORCEABLE, OUR LIABILITY FOR DAMAGES SHALL NOT EXCEED THE AMOUNT PAID BY PURCHSER(S) OF SUCH PRODUCT(S)

Other Information

COPYRIGHTS
Copyright © 2020 Kido Sports Co., Ltd. All rights reserved. No part of this guide may be reproduced in any form or by any process whatsoever without prior written consent from the copyright holder.
LICENSES
The ScorpionExo® and the EXO-Com® trademark/logo are exclusively owned by Kido Sports Co., Ltd. Any use of the mark by any other parties without prior written permission of Kido Sports Co., Ltd. constitutes an infringement of legal rights. The Bluetooth® trademark is owned by Bluetooth SIG, and is used under license by BITwave Pte Ltd.
IC/SAR COMPLIANCE STATEMENT

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209.

This equipment should be installed and operated with minimum distance 0 mm between the radiator and your head. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Cet appareil est conforme aux limites d'exposition DAS incontrôlée pour la population générale de la norme CNR-102 d'Industrie Canada et a été testé en conformité avec les méthodes de mesure et procédures spécifiées dans IEEE 1528 et IEC 62209.

Cet équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre tête. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction avec tout autre antenne ou transmetteur.

été testé en conformité avec les méthodes de mesure et procédures spécifiées dans IEEE 1528 et IEC 62209. Cet équipement doit être installé et utilisé avec une distance minimale de 0 mm entre le radiateur et votre tête. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction avec tout autre antenne ou transmetteur.

FCC/SAR COMPLIANCE STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the Equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA).

These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.919 W/kg.

Note: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

CE/SAR COMPLIANCE STATEMENT

This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment.

End user must follow the specific operating instructions for satisfying RF exposure compliance. These requirements set a SAR limit of 2.0 W/kg averaged over one gram of tissue. To meet the above requirement, the device should be placed at least 5mm away from human body in normal use condition.